Saturday, 14 September 2019

THEORETICAL YIELD AND PRECNTAGE YIELD

Hii guys ,
 In this topic I am going  to  share  some ideas about how you can calculate yield of the compound  which can be obtained  in chemical reactions or used  in chemical reactions. Because it's very important thing for pharmaceuticals industry because we have save the money  we have give  100% productivity then Very important to konw  exactly how amount  or how much  percentage we get after  the process.
The world of pharmaceutical production is an expensive one. Many drugs have several steps in their synthesis and use costly chemicals. A great deal of  researchers takes place to develop better ways to make drugs faster and more efficiently. Studying how much of a compound is produced in any given reaction is an important part of cost control.     

Percent Yield

Chemical reactions in the real world don’t always go exactly as planned on paper. In the course of an experiment  things will contribute to the formation of less product than would be predicted. Besides spills and other experimental errors, there are usually losses due to an incomplete reaction, undesirable side reactions, etc. Chemists need a measurement that indicates how successful a reaction has been. This measurement is called the percent yield.
To compute the percent yield, it is first necessary to determine how much of the product should be formed based on stoichiometry. This is called the theoretical yield, the maximum amount of product that could be formed from the given amounts of reactants. The actual yield is the amount of product that is actually formed when the reaction is carried out in the laboratory The percent yield is the ratio of the actual yield to the theoretical yield, expressed as a percentage.
Percent Yield=Actual YieldTheoretical Yield×100%
Percent yield is very important in the manufacture of products. Much time and money is spent improving the percent yield for chemical production. When complex chemicals are synthesized by many different reactions, one step with a low percent yield can quickly cause a large waste of reactants and unnecessary expense.
Typically, percent yields are understandably less than 100% because of the reasons indicated earlier. However, percent yields greater than 100% are possible if the measured product of the reaction contains impurities that cause its mass to be greater than it actually would be if the product was pure. When a chemist synthesizes a desired chemical, he or she is always careful to purify the products of the reaction.

Sample Problem: Calculating the Theoretical Yield and the Percent Yield

Potassium chlorate decomposes upon slight heating in the presence of a catlyst according to the reaction below:

Sample Problem: Calculating the Theoretical Yield and the Percent Yield

Potassium chlorate decomposes upon slight heating in the presence of a catlyst according to the reaction below:
2KClO3(s)→2KCl(s)+3O2(g)
In a certain expriment,40.0 g KClO3 is heated until it completely decomposes. What is the theoretical yield of oxygen gas? 
The experiment is performed and the oxygen gas is collected and its mass is found to be 14.9 g. What is the percent yield for the reaction?
First, we will calculate the theoretical yield based on the stoichiometry.
Step 1: List the known quantities and plan the problem.
Known
  • given: mass of KClO3 = 40.0 g
  • molar mass KClO3 = 122.55 g/mol
  • molar mass O2 = 32.00 g/mol
Unknown
  • theoretical yield O2 = ? g
Apply stoichiometry to convert from the mass of a reactant to the mass of a product:
g KClO3→mol KClO3→mol O2→g O2
Step 2: Solve.
40.0 g KClO3×1 mol KClO3122.55 g KClO3×3 mol O22 mol KClO3×32.00 g O21 mol O2=15.7 g O2
The theoretical yield of O2 is 15.7 g.
Step 3: Think about your result.
The mass of oxygen gas must be less than the 40.0 g of potassium chlorate that was decomposed.
Now, we use the actual yield and the theoretical yield to calculate the percent yield.
Step 1: List the known quantities and plan the problem.
Known
  • Actual yield = 14.9 g
  • Theoretical yield = 15.7 g (from Part 12.11A)
Unknown
  • Percent yield = ? %
Percent Yield=Actual YieldTheoretical Yield×100%
Use the percent yield equation above.
Step 2: Solve.
Percent Yield=14.9 g15.7 g×100=94.9%
Step 3: Think about your result.
Since the actual yield is slightly less than the theoretical yield, the percent yield is just under 100%.

solid-state sodium-ion battery

Hi everyone today am sharing some information about solid state sodium ion battery this research  by
University of Housto .
Solid-state sodium-ion batteries are far safer than conventional lithium-ion batteries, which pose a risk of fire and explosions, but their performance has been too weak to offset the safety advantages. Researchers Friday reported developing an organic cathode that dramatically improves both stability and energy density.
The improved performance, reported in the journal Joule, is related to two key findings:
  • The resistive interface between the electrolyte and cathode that commonly forms during cycling can be reversed, extending cycle life, and
  • The flexibility of the organic cathode allowed it to maintain intimate contact at the interface with the solid electrolyte, even as the cathode expanded and contracted during cycling.
Yan Yao, associate professor of electrical and computer engineering at the University of Houston and corresponding author of the paper, said the organic cathode—known as PTO, for pyrene-4,5,9,10-tetraone—offers unique advantages over previous inorganic cathodes. But he said the underlying principles are equally significant.
"We found for the first time that the resistive interface that forms between the cathode and the electrolyte can be reversed," Yao said. "That can contribute to stability and longer cycle life." Yao also is a principal investigator at the Texas Center for Superconductivity at UH. His research group focuses on green and sustainable organic materials for energy generation and storage.
Yanliang "Leonard" Liang, a research assistant professor in the UH Department of Electrical and Computer Engineering, said that reversibility of the interface is the key, allowing the solid-state battery to reach a higher energy density without sacrificing cycle life. Normally, a solid-state battery's ability to store energy is halted when the resistive cathode?electrolyte interface forms; reversing that resistance allows energy density to remain high during cycling, he said.
Lithium-ion batteries with their liquid electrolytes are able to store relatively high amounts of energy and are commonly used to power the tools of modern life, from cell phones to hearing aids. But the risk of fire and explosion has heightened interest in other types of batteries, and a solid-state sodium-ion battery offers the promise of increased safety at a lower cost.
Xiaowei Chi, a post-doctoral researcher in Yao's group, said a key challenge had been to find a solid electrolyte that is as conductive as the liquid electrolytes used in lithium-ion batteries. Now that sufficiently conductive solid electrolytes are available, a remaining challenge has been the solid interfaces.
Xiaowei Chi, a post-doctoral researcher in Yao's group, said a key challenge had been to find a solid electrolyte that is as conductive as the liquid electrolytes used in lithium-ion batteries. Now that sufficiently conductive solid electrolytes are available, a remaining challenge has been the solid interfaces.
One issue raised by a solid electrolyte: the electrolyte struggles to maintain intimate contact with a traditional rigid cathode as the latter expands and contracts during battery cycling. Fang Hao, a Ph.D. student working in Yao's group, said the organic cathod is more pliable and thus able to remain in contact with the interface, improving cycling life. The researchers said the contact remained steady through at least 200 cycles.
"If you have reliable contact between the electrode and electrolyt you will have a great chance of creating a high-performance solid-state battery," Hao said.

Thursday, 18 April 2019

CHEMISTRY OF GUNPOWDER

Gunpowder is a mixture of potassium nitrate, carbon, and sulfur. Since it is a mixture, it does not, strictly speaking, have a formula. The standard composition for black powder (i.e, Proportions by weight) are 75%potassium nitrate , 15% Carbon, and 10% sulfur.
Sulfur's main role in gunpowder is to decrease the ignition temperature. A sample reaction for sulfur-free gunpowder would be
6 KNO3 + C7H4O → 3 K2CO3 + 4 CO2 + 2 H2O + 3 N2.
With the Fourth of July and American Independence Day on the horizon, a somehow topical post seemed in order. Having already examined the chemical compounds that give fireworks their colours . I decided to examine another important firework component here: the first chemical explosive, gunpowder, also commonly referred to as black powder.
Until the mid-19th Century, gunpowder was the only known chemical explosive. Its use can be traced much earlier than this, however, and there are historical accounts of its use in fireworks in China as far back as 1200AD. In subsequent centuries it had military applications in rifles and cannons, but in these it has long since been replaced by modern, smokeless powders. The fireworks industry is one of the last major industries that still uses traditional black powder.

Rather than being one particular compound, gunpowder is actually a mix of three different components. It consists of potassium nitrate (75% by weight), charcoal (15% by weight), and sulfur (10% by weight). Each of these components plays an important role in the combustion of gunpowder.

Potassium nitrate, also known as ‘saltpetre’, or ‘saltpeter’, decomposes at high temperature to provide oxygen for the reaction. This means that gunpowder doesn’t need to be exposed to air to burn – and is why smothering fireworks won’t stop them burning! The charcoal is often represented simply as being a source of carbon, which acts as a fuel, though it’s actually a broken down form of cellulose, with the approximate empirical formula C7H4O. Finally, the sulfur can also act as a fuel, though its inclusion has more to do with the fact that it undergoes exothermic reactions (reactions that give off heat) at relatively low temperatures, providing more energy and lowering the ignition temperature of the charcoal.
It’s worth noting that just mixing these three constituents together isn’t enough to produce good quality gunpowder; they must be thoroughly mixed, moistened and ground to produce a reactive mixture. Deviations from the ideal ratio given above are sometimes utilised to alter the burning behaviour of the mixture, and the addition of small amounts of water to the mixture can also be used to extend the burning time.
The precise reactions of gunpowder are difficult to elucidate. Rather than being a simple single reaction, the combustion of gunpowder consists of many differing complex reactions. It’s possible, however, to provide simplified equation that provides an overall idea of the products of the various reactions, as shown in the graphic. A mixture of solid and gaseous products are produced by the reactions, along with a very small amount of water.
The obvious use for black powder in firework is as the ‘lift charge’, which propels the firework into the air. The fuse, which allows the delay before the bursting of the firework, and the bursting charge itself, will also utilise gunpowder. The burning of the charcoal in gunpowder is often the source of the sparkling tails of fireworks as they ascend. The gases produced by the combustion reaction are the causes of the propellant effect, and the eventual bursting of the firework.

Libermann's nitroso reaction

 nitroso reaction While phenol is reacted with NaNO2 and concentrated H2SO4, it provides a deep green or blue colour which changes to red on...